Category: Home

Brick as a building material is in high demand due to its operational characteristics – it is durable, strong, environmentally friendly, safe, because it is non-combustible. Country cottages are very often built from it. Electrical wiring in a brick house is mounted in two ways – hidden and external. Let’s consider each of them in more detail.

Installation of hidden wiring in a brick house

At the stage of construction, all wiring is installed using a hidden method directly on the surfaces of rough walls, which will later be plastered.

On the one hand, the work is done neatly, all the wires are fixed. But on the other hand, they will be walled in plaster. Let’s assume that at some point there will be a need to change the load on any feeder branches to a greater side. For this, it will be necessary to pull wires with a large cross-section of wires, but already externally or in strobes, violating the integrity of the finish. If the wiring is first mounted in the corrugation, then it will be enough to pull out the old wire, and a new one is stretched in its place.

Installation of electrical wiring in a brick house by the external method

External installation of electrical wiring in brick houses is carried out only in areas with clean masonry. It is impossible to make strobes in them, as this will disturb the aesthetics, and the surface will not be covered with plaster. In this case, the optimal solution would be to use retro wiring. Even cable channels or boxes will not look so effective against the brick background.

Pay attention to the photo below – here we used ceramic insulator rollers and a distribution box made of the same material. The wires themselves visually harmonize with the bare brick – this creates a certain atmosphere, which is most suitable for finishing plinths.

No additional linings are needed in this case, as the level of fire safety is ensured not only by the absence of the risk of ignition of the walls, but also by the use of wiring in a non-combustible braid.

What does the cost of installing wiring in a brick house consist of?

The cost of electrical installation work in brick houses consists of the following factors:

• The total cost of materials
• Type of electrical equipment
• The volume of additional works

If the electrical wiring in a brick house is mounted with a minimum amount of labor, then the installation of a shield, and hidden sockets will be associated with certain difficulties.

In the photo below, you can see that the switchboard is in a niche. Wiring can be foreseen at the stage of laying the walls, but in most cases it is necessary to carry out cutting after the fact of its completion. Similar work is carried out for the arrangement of landing sockets for each internal switch, outlet.

All this affects the final cost of services.

For the installation of electrical wiring in a brick house to be carried out correctly, qualitatively, reliably, entrust this type of work to experienced professionals, whom you will find in the company Sagan Electric. They provide a full range of electrical installation services at all types of facilities.

You might have found yourself at a crossroads. Maybe the house is feeling a little stale, but you have a feeling that you might want to be selling in the next couple of years. That could be due to a retirement on the horizon or you might be expecting that the family isn’t done growing.

There’s many different things that might have you considering a remodel in your home. No matter the reason, it’s a good thought to go from asking yourself “What is my home worth as-is?” to “What could it be worth with a little updating?” What’s better than improving your day-to-day life all while upping the resale value?

A Home Office

Adding a workspace into your home can be done in a few ways. A spare bedroom, a finished basement or an attached garage are all good candidates when it comes to making space for a home office. Due largely in part to the pandemic, the amount of people working from home has hit an all-time high. 

For many that started working from home during the pandemic, they are hoping to continue to have that option well after the pandemic is completely behind us. Even if the home office is something you personally might not get much use out of, it is sure to be something many potential buyers are looking for once your home is finally on the market. 

Odds are, it won’t take much cost or effort to make a spare area in your home workplace ready, but it is sure to add to the value and desirability whether you are looking to sell in a few months or years from now. 

Finish Your Basement

This a good candidate for the home office we’ve already talked about, but don’t think that’s the only potential use of space like this. For you as the current owner or for whoever is the next buyer,  stylishster having a finished basement is a simple way to add more usable and heated square footage to the home.

This is a blank canvas to do with nearly whatever your family pleases. Outside of the option as a home office, it can be a gym, an at-home theater, an additional bedroom, or even a place for the kids to feel like it’s theirs. Extra space is sure to be equally enjoyed by you and yours as well as being something the next buyers are sure to be willing to pay extra for.

Add More Parking

As family units, we typically have more cars than we did 50+ years ago. If you have a decently older home, whoever built it might have never dreamed of having more than one car per family. Looking at then compared to now, odds are much higher that in a 2 parent household, both parents are working and need their cars to get there.

Click here information : liangzhongmiye

Visit this site : Newmags

In addition to the high likelihood that both parents will need a space to park, any child old enough to drive might have a car for themselves to get to school and/or work. Even if you aren’t needing extra parking yourself, having that ready for the next buyer might be what makes them choose your home over another.